Panasonic LX-TD500 Programming Manual page 145

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
58. Release of BRI/PRI line while talking when
'DISCONNECT' signal is received
Don't Release
1.
Release
2.
Don't Release
Specifies whether or not the system releases the ISDN BRI / PRI
line, when receiving the line disconnection message from the ISDN
Network while the line is in talking.
None
59. ARS Call Timeout Mode
Local Access
1.
Local Access
2.
Disconnect
Specifies the outgoing operation mode when the inter-digit timer
expires while making an outgoing call with ARS. If you select
'Local Access' and the timer expires, the system will select a CO
line on a Local CO Line Access basis and return CO dial tone.
• 1.6 Originating Features (F/G)
– Automatic Route Selection (ARS)
60. Empty Group
Allow
1.
Allow
2.
Disallow
Determines whether an Extension Group or an Incoming Group can
be empty (All members logged out). If it is set to 'Disallow,' the
group cannot be empty. At least one extension must be logged in.
• 1.3 System Features (F/G)
– Extension Group
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
• 1.8 Ringing Features (F/G)
– Log-In/Log-Out
• 4.3.45 Log-In / Log-Out (U/M)
System
145