Panasonic LX-TD500 Programming Manual page 74

Configuration
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
74
Group No.
1
1-48 or 1-128
Type: CO, Qsig-Master, Qsig-Slave
Specifies the Trunk Group (1-48) to which the PRI port is assigned.
Type: EXT
Specifies the Extension Group (1-128) to which the PRI port is
assigned.
• 1.3 System Features (F/G)
– Extension Group
– Trunk Group
• 3.1 TIE Line Features (F/G)
– TIE Line Service
• 3.2 Trunk Group (P/G)
• 3.3 Extension Group (P/G)
Status
—
1.
INS
2.
OUS
3.
FAULT
Specifies the operating status of the PRI port.
1.
INS: The PRI port is In-Service.
2.
OUS: The PRI port is Out-of-Service.
3.
FAULT: The PRI port is defective (hardware).
In this case, the LED indicator on the PRI23 card will light.
None
Programming Guide