Panasonic LX-TD500 Programming Manual page 174

Group
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
174
Calls to Empty Group
Disable
1.
Enable
2.
Disable
Allows for calls to empty (all Logout) Operator or UCD Groups to
be queued.
If enabled, calls will be queued to the group.
If disabled, the extension will receive a reorder tone, and the CO
call will be transferred to the overflow destination immediately.
(Assignable only when "Operator" or "UCD" is specified in "Group
Type" programming.)
• 1.3 System Features (F/G)
– Extension Group
– Operator Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
[UCD Setting] Time Table No.
None
None, 1-32
Specifies the UCD Time Table (1-32) for the UCD Group.
• 1.3 System Features (F/G)
– Extension Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
Programming Guide