Panasonic LX-TD500 Programming Manual page 108

System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
108
Released Link Operation
Disable
1.
Enable
2.
Disable
Used to turn on / off "Released Link Operation" mode of the
extension. When Released Link Operation is enabled, an extension
user will be automatically released from a call (extension, outside)
after transferring it to the destination, if the destination extension is
idle. This feature simplifies the transfer operation by eliminating
the need for going on-hook or pressing the RELEASE button after
transferring the call.
This feature is convenient for extension users, such as Operators,
who handle a large volume of calls.
• 1.3 System Features (F/G)
– Released Link Operation
• 4.3.67 Released Link Operation (U/M)
Digits Restriction in CO Talk Mode
Unrestricted
1.
Unrestricted
2.
1-15: the digits to be dialed out.
Specifies the maximum number of digits that can be dialed during
a CO call.
If the outside party hangs up during a CO call and the extension
user tries to dial out while still on the same CO line, the system will
disconnect the line at the instant the assigned number of digits are
dialed.
Note
• This program can be added if the CPC Signal Detection is
not provided by the Central Office.
• 1.3 System Features (F/G)
– Calling Party Control (CPC) Signal Detection
Programming Guide