Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
ESF Frame Option
C = A, D = B
1.
C = A, D = B
2.
C = 0, D = 0
3.
C = 1, D = 0
4.
C = 0, D = 1
5.
C = 1, D = 1
Defines the values of C-bit and D-bit.
(Assignable only when "Frame Sequence" is set to "ESF.")
• 1.3 System Features (F/G)
– T1 Carrier
First Dial Timer (CO)
1.0 s
0.5-8.0 s in 0.5 s increments
On outgoing CO calls, the system waits at least 1.0 second after
seizing the CO line, before sending the dialing digits to the Central
Office by default.
This allows the Central Office enough time to accept the dialing
digits correctly.
Specifies the appropriate value depending on the requirements of
your local Central Office.
• 1.3 System Features (F/G)
– T1 Carrier
Configuration
25
Advertisement
Table of Contents
