Panasonic LX-TD500 Programming Manual page 268

Features
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
268
[Voice Mail Command] Get Message
*H
Up to 16 digits consisting of 0-9, , # or H
Specifies the Get Message command.
This command is transmitted to a VM port when the message
receiver presses the MESSAGE button to retrieve a voice message.
• 1.3 System Features (F/G)
– Integration, VPS
[Voice Mail Command] AA Service
#8
Up to 16 digits consisting of 0-9, , # or H
Specifies the AA (Automated Attendant) Service command.
If AA Service is set to "Start" by System Programming, this
command is sent to a VM port when an incoming CO call is
answered by the VM port.
• 1.3 System Features (F/G)
– Integration, VPS
[Voice Mail Command] VM Service
#6
Up to 16 digits consisting of 0-9, , # or H
Specifies the VM (Voice Mail) Service command.
This command is transmitted preceding the "Get Message"
command above. This is effective to switch to a VM port when an
AA port lights the MESSAGE indicator.
This command is also transmitted preceding the "Leave Message"
command when Operator transfers a call to an extension and then
it is forwarded to an AA port so that the AA port can be switched
to VM port temporarily.
• 1.3 System Features (F/G)
– Integration, VPS
Programming Guide