Panasonic LX-TD500 Programming Manual page 154

Group
Trunk Group Copy
Used to copy a part of or all settings of a certain Trunk Group to all other Trunk Groups at a
time. You can also specify one or several Trunk Groups as the copy destination.
Copying the Trunk Group Parameters to Other Trunk Groups
1. Edit the parameters of the copy source Trunk Group and save it.
2. Point to
• "Trunk Group Copy" screen is displayed.
• The current Trunk Group (copy source) number is shown as "Copy from Trunk Group
1-48."
3. Select the Trunk Group parameters to copy in "Copy Item" field.
• Items marked with " " are copied.
4. Point to
• All displayed Trunk Group Nos. will be marked with " ."
• You can also specify one or several Trunk Groups as the copy destination by clicking it
(them) directly.
5. Point to
• "Are you sure?" is displayed.
6. Point to
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Trunk Groups are immediately effective when copying is
finished.
154
on "3-1 Trunk Group" screen of the copy source and click.
in the "Destination Trunk Group" field and click.
and click.
and click.
Programming Guide