Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
% Break Detection
16-96 ms
1.
16-96 ms
2.
16-136 ms
Specifies the Pulse Break Detection length.
Dialed digits from a dial pulse type SLT are transmitted to the
system by making and breaking a loop current, thereby interrupting
loop current. Duration time required to detect the number of breaks
may vary depending on the type of SLT connected.
(Assignable for DHLC and ESLC only.)
None
Flash Detection
Yes
1.
Yes
2.
No
Activates or deactivates the detection of Flash signal transmitted
from an SLT.
This determines the treatment of the call after an SLT user flashes
the switchhook.
If set to "Yes," the system will place the call on consultation hold.
Therefore, flash detection is enabled. If set to "No," the system will
disconnect the call. In other words, flash detection is disabled.
(Assignable for DHLC and ESLC only.)
None
LPR Version
(Display only)
0-15
Displays the LPR Software Version.
• 1.5 VPS (DPT) Port Assignment (P/G)
Configuration
15
Advertisement
Table of Contents
