Panasonic LX-TD500 Programming Manual page 202

Line
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
202
Name
CO001-CO192
Up to 10 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ % ( ) + , - / : ; < = > ? @ &.
Specifies the name for the trunk line.
Note
• This is shown on a display PT when receiving a call using
this trunk.
• 1.17 Display Features (F/G)
– Display, Call Information
Incoming Type
(1) DIL: ELCOT/GCOT/LCOT/T1 [GCO]/T1 [LCO] card (2)
DID: DID/T1 [DID] card (3) DID (ISDN): BRI/PRI23 card (4)
TIE: T1 [TIE] card
1.
DIL
2.
DID
3.
DID (ISDN)
4.
MDN
5.
TIE
Specifies how the incoming CO call via this trunk line is routed to
the destination in the system.
1.
DIL:
Incoming CO calls are routed by DIL (Direct In Lines) 1:1 or
1:N feature.
2.
DID:
Incoming CO calls are routed by DID (Direct Inward Dialing)
feature.
3.
DID (ISDN):
Incoming CO calls are routed by ISDN DID (Direct Inward
Dialing) feature.
4.
MDN:
Incoming CO calls are routed by ISDN MDN (Multiple
Directory Number) feature.
5.
TIE:
Incoming CO calls are routed by TIE Line feature.
Programming Guide