Panasonic LX-TD500 Programming Manual page 200

Line
Trunk Line Copy
Used to copy a part of or all settings of a certain Trunk Line to all other same type Trunk Lines
at a time. You can also specify one or several Trunk Lines as the copy destination. This copy
function is available between the Trunk Lines of the same type Trunk Cards.
Copying the Trunk Line Parameters to Other Trunk Lines
1. Edit the parameters of the copy source Trunk Line and save it.
2. Point to
• "Trunk Line Copy" screen is displayed.
• The current Trunk Line (copy source) number is shown as "Copy from XXX XXXXX-
XX."
3. Select the Trunk Line parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the attribute of the copy source Trunk Line.
• Items marked with " " are copied.
4. Point to
• All displayed Trunk Line Nos. will be highlighted.
• You can also specify one or several Trunk Lines as the copy destination by clicking it
(them) directly.
5. Point to
• "Are you sure?" is displayed.
200
on "4-1 Trunk Line" screen of the copy source and click.
in the "Destination Trunk Line" field and click.
and click.
Programming Guide