Panasonic LX-TD500 Programming Manual page 42

Configuration
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
42
[Extension] T203
10 s
1-60 s
Specifies the time to detect no communication status of L2.
None
[Extension] T302
10 s (BRI), 15 s (PRI23)
2-30 s
Specifies the maximum time allowed between each digit on an
incoming call. Applies to the overlap receiving.
None
[Extension] T303
5 s (BRI), 2 s (PRI23)
2-12 s
Specifies the maximum time that the system waits after sending the
SETUP (call setting) message to ISDN, before receiving the reply
to it.
None
[Extension] T304
0 s
0-255 s
Specifies the maximum time allowed between each digit on an
outgoing call. Applies to the overlap receiving.
None
Programming Guide