Configuration
1.2.7 Card Properties (T1)
Used to set the parameters for the T1 card.
When you change the card properties, the card status must be "OUS (Out-of-Service)."
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
24
Line Coding
B8ZS
1.
B8ZS
2.
AMI
Specifies the T1 PCM (Pulse Code Modulation) Line Coding type
for each T1 card.
• 1.3 System Features (F/G)
– T1 Carrier
Frame Sequence
ESF
1.
D4
2.
ESF
Specifies the Frame Sequence type for each T1 card.
• 1.3 System Features (F/G)
– T1 Carrier
Programming Guide