Panasonic LX-TD500 Programming Manual page 326

Maintenance
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
326
[Serial Interface Port] PROG – NL Code
CR + LF
1.
CR+LF
2.
CR
Specifies the NL (New Line) Code for your printer or personal
computer.
If your printer or personal computer automatically feeds lines with
a carriage return, select "CR (Carriage Return)."
If not, select "CR+LF (Line Feed)."
None
[Serial Interface Port] PROG – Word Length
(Display only)
8 bits
Defines the number of bits in each byte or character.
Note
• Port 1 is fixed to 8 bits.
None
[Serial Interface Port] PROG – Stop Bit
(Display only)
1 bit
A stop bit code indicates the end of a bit string which composes a
character. Select an appropriate value depending on the
requirements of your printer or personal computer.
Note
• Port 1 is fixed to 1 bit.
None
Programming Guide