Configuration
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
40
[CO/Qsig-Master(PRI only)/Qsig-Slave(PRI only)] T302
10 s (BRI), 15 s (PRI23)
2-30 s
Specifies the maximum time allowed between each digit on an
incoming call. Applies to the overlap receiving.
None
[CO/Qsig-Master(PRI only)/Qsig-Slave(PRI only)] T303
5 s (BRI), 4 s (PRI23)
2-12 s
Specifies the maximum time that the system waits after sending the
SETUP (call setting) message to ISDN, before receiving the reply
to it.
None
[CO/Qsig-Master(PRI only)/Qsig-Slave(PRI only)] T304
0 s (BRI), 30 s (PRI23)
0-255 s
Specifies the maximum time allowed between each digit on an
outgoing call. Applies to the overlap receiving.
None
[CO/Qsig-Master(PRI only)/Qsig-Slave(PRI only)] T305
30 s
4-30 s
Specifies the maximum time that the system waits after sending the
DISC (disconnection) message to ISDN, before receiving the reply
to it.
None
Programming Guide