Panasonic LX-TD500 Programming Manual page 182

Group
Group
Type
Terminate
Operator
UCD
( = assignable)
When "DIL 1:N" is specified in "Group Type" programming of Incoming Group, this feature
*1
does not work.
Incoming Group Copy
Used to copy a part of or all settings of a certain Incoming Group to all other Incoming Groups
at a time. You can also specify one or several Incoming Groups as the copy destination.
Copying the Incoming Group Parameters to Other Incoming Groups
1. Edit the parameters of the copy source Incoming Group and save it.
2. Point to
• "Incoming Group Copy" screen is displayed.
• The current Incoming Group (copy source) number is shown as "Copy from Incoming
Group 1-96."
182
Applicability of Group Types to Overflow Destinations
External OGM
DN
Pager Group
on "3-4 Incoming Group" screen of the copy source and click.
Overflow Destination
Extension Phantom
Group Extension
Incoming
RMT
Group
*1
*1
Programming Guide