Table of Contents
Advertisement
System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
126
2. SLT On-hook with consulting held call
Consulting Hold
1.
Consulting Hold
2.
Disconnect
Specifies the result of pressing the switchhook lightly and then
replacing the handset during an outside call.
This setting applies to SLT users only.
• 1.10 Holding Features (F/G)
– Consultation Hold
3. FLASH button operation while CO talking
Release the trunk
1.
Release the trunk
2.
Don't release the trunk
Specifies the result of pressing the FLASH button on PT during an
outside call.
• 1.12 Conversation Features (F/G)
– External Feature Access
4. FLASH button operation when "Don't release
the trunk" is selected at #3
Disconnect and hear CO dial tone
1.
Disconnect and hear CO dial tone
2.
Sending EFA signal
Specifies the result of pressing the FLASH button on PT during an
outside call when "Don't release the trunk" is selected in "3.
FLASH button operation while CO talking."
• 1.12 Conversation Features (F/G)
– External Feature Access
Programming Guide
Advertisement
Table of Contents
