Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
47. Tone Type for Outgoing Calls
Busy + Reorder
1.
Busy + Reorder
2.
Busy
3.
Reorder
Specifies a tone type for outgoing calls.
None
48. Call Pickup with DSS S-CO key
Disable
1.
Enable
2.
Disable
By default, an S-CO button assigned to a DSS button (on a DSS
Console) is available for monitoring the call activity only, not
available for making / receiving a call.
If this parameter is enabled, an S-CO button (on a DSS Console)
can be used to answer the incoming CO call on the S-CO button and
retrieve the CO call held on the S-CO button.
• 1.16 Button Features (F/G)
– Button, Line Access
49. LCD Display Mode while CO talking
Caller ID
1.
Caller ID
2.
Duration
Specifies the initial display, Caller ID or Call Duration, which is
shown on the display while CO talking.
• 1.5 Attended Features (F/G)
– Caller ID Service
System
143
Advertisement
Table of Contents
