Electrical Specifications For The M120 Ac Power Supply; Figure 26: M120 Ac Plug Types - Juniper M120 Hardware Manual

Table 54: AC Power Cord Specifications (continued)
Country
United Kingdom
Related
Documentation

Electrical Specifications for the M120 AC Power Supply

Copyright © 2018, Juniper Networks, Inc.
Model Number
CBL-M-PWR-RA-UK

Figure 26: M120 AC Plug Types

Australia
China
(SAA/3) (PSB-10)
Japan North America
(L6-20P) (L6-20P)
NOTE: If you plan to operate a maximally configured AC-powered router, we
recommend that you provision at least 33 A @ 240 VAC (11 A per inlet) for
the system, or at least 11 A maximum @ 240 VAC for each power supply. Use
a facility circuit breaker rated for 20 A, 125/250 VAC minimum for each AC
power supply. Doing so enables you to operate the router in any configuration
without upgrading the power infrastructure.
In North America and Japan, use both inlets for 125 VAC.
CAUTION: Power cords and cables must not block access to router
components or drape where people could trip on them.
M120 AC Power Supply Description on page 72
Replacing an M120 AC Power Supply on page 239
Replacing an M120 AC Power Supply Cord on page 244
Connecting Power to an AC-Powered M120 Router on page 167
Table 55 on page 96 lists the AC power supply electrical specifications.
Chapter 10: AC Power Requirements and Specifications
Electrical Specification
240 VAC, 50 Hz AC
Europe
(CEE 7/7) (CEI 23-16/VII)
North America
NEMA
(BS89/13)
(L6-20)
Plug Type
BS89/13
Italy
UK
95