Installing An Archived Database; Introduction; How To Install An Archived Database - Nortel Meridian 1 Planning, Installation And Operating Instructions
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Administration and maintenance (507 pages)
Table of Contents
Advertisement
Installing an archived database
Introduction
How to install an archived database
Option 11C Compact
This section describes how to install an archived Customer Database in a
designated Meridian 1 Option 11C Compact using the Software Delivery
(PCMCIA) card.
Summary of steps
The archived customer database installation steps are summarized in the
following list. They consist of:
•
Checking to make sure the Software Delivery card is installed.
•
Selecting the Utilities menu.
•
Selecting Install Archived database option.
•
Loading the database.
Installing the database
The following procedure describes how to install an archived database using
Software Delivery card.
Procedure 76
Customer Database Installation Procedure (Continued)
1
If not previously done, install the Software Delivery card in the socket
in the faceplate of the System Core Card.
To install the Software Delivery card:
• Insert the Software Delivery card in slot A of the PCMCIA
socket located in the faceplate of the NTMW01 System Core
card. Gently press on the Software Delivery card until it is firmly
seated.
Chapter 22 — Upgrading software
Planning, Installation, Fault Clearing and CCBR Guide
Page 343 of 536
Advertisement
Chapters
Table of Contents
