Chapter 21 - Installing Hospitality; An Overview; Installing Hardware Connections Between The Telephone System And The Hospitality Pc; Installing Hospitality Software On The Pc - Nortel Meridian 1 Planning, Installation And Operating Instructions

Chapter 21 — Installing Hospitality

An overview

Installing hardware connections between the telephone
system and the Hospitality PC

Installing Hospitality software on the PC

Option 11C Compact
This chapter discusses the installation of the software and hardware needed
to support Hospitality features.
The Hospitality applications run on a dedicated PC, typically located at the
front desk of the hotel. The PC is connected to the telephone switch using two
links: one for the Registrar application, and one for Journal. A third link may
be needed if MAT is being run on the same PC.
For information about connecting the PC's COM ports, and about setting up
the COM ports, refer to the Journal Adminitration and User Guide.
The Hospitality Applications Installation Kit installs all required software.
The software installed depends on the activation key you enter at the
beginning of the installation process. The installer places the applications in
the appropriate areas and ensures that the default information is properly
configured.
A brief installation procedure is provided here. For detailed software
installation instructions, see the Registrar Administration and User Guide, or
the Journal Administration and User Guide.
Planning, Installation, Fault Clearing and CCBR Guide
Page 301 of 536