Resetting Meridian Mail Compact Option - Nortel Meridian 1 Planning, Installation And Operating Instructions

Page 210 of 536

Resetting Meridian Mail Compact Option

553-3121-210 Standard 3.0
Chapter 20 — Meridian Mail Compact Option installation and maintenance
4 At the prompt, Do you want to courtesy down the system?,
press the up arrow key to choose Yes, and press <Return>.
The display charts the progress of the courtesy down. Hardware
locations are put out of service as users finish their sessions. System
Status displays "CourtesyDown" when the process is complete.
5 Disable the data ports for the console and the AML. (Refer to
Procedure 38.)
Note: At this point, Meridian Mail Compact Option can be worked
on, the CPU card can be removed for maintenance or, an external tape
drive can be attached.
—————————— End of Procedure ——————————
The "Reset" button is located on the Meridian Mail Compact Option card
faceplate. Press the Reset button after installing an external tape drive, after
removing an external tape drive, or after performing troubleshooting and
maintenance.
Note: Power up an external tape drive connected to the mail card.
Procedure 40
Resetting mail
1 Press the reset button on the Meridian Mail Compact Option card.
2 Enable the data ports for the console and the AML. (Refer to
and disabling the console and AML data ports" on page
3 Enter AX <Return> to view the Meridian Mail Compact Option screen.
4 Wait until the system has loaded and the logon screen is displayed
(approximately four minutes).
5 From the Main Menu, choose
"5 System Status and Maintenance."→"1 System Status."
6 Press the [Activate System] softkey.
—————————— End of Procedure ——————————
January 1999
"Enabling
208.)