Software Maintenance Tools; Diagnostic Programs - Nortel Meridian 1 Planning, Installation And Operating Instructions

Page 448 of 536

Software maintenance tools

Diagnostic programs

553-3121-210 Standard 3.0
Chapter 25 — Fault locating and clearing
Software maintenance tools help identify and clear faults, and provide
self-checking capabilities. Software maintenance tools are divided into the
following categories:
• Diagnostic programs monitor a variety of operations, detect faults, and
initiate corrective action during normal call processing.
• The History File records maintenance-related system messages.
• Interactive programs test hardware, isolate faults, and verify fault
clearing.
Diagnostic software programs monitor system operations, detect faults, and
clear faults. Some programs run continuously, some are scheduled as part of
the Midnight Routine, which is run automatically at a preset time.
Overlays
Some programs are also called overlays or loads. They are identified by a title
and a number preceded by the mnemonic for load (for example, Trunk
Diagnostic — LD 36).
See the Option 11C Compact Software Guides for detailed information on all
diagnostic programs.
Error Monitor
The Error Monitor is a resident program which continuously tracks call
processing. The Error Monitor generates system messages if it detects invalid
or incorrectly formatted call processing information.
System messages generated by the Error Monitor are preceded by the
mnemonic ERR, which usually indicates hardware faults, or the mnemonic
BUG, which usually indicates software problems.
Initialize Program
The Initialize Program momentarily interrupts call processing as it clears
common equipment faults. It then rebuilds call-dependent data and generates
system messages, with the mnemonic INI, which indicate the status of the
system. This process is called an initialization (or INI).
January 1999