Nortel Meridian 1 Planning, Installation And Operating Instructions page 327

Hide thumbs Also See for Meridian 1:

Table of Contents

Page 308 of 536

553-3121-210

Standard 3.0

Chapter 22 — Upgrading software

Select the type of upgrade to be performed.

Select type of upgrade to be performed:

1. New Software Upgrade

2. Feature/parameter Upgrade

[q]uit, <cr> current menu, [m]ain menu, [h]elp or

[?],[p]revious menu

Enter Selection:

Select the Feature Set to be enabled.

Note: The Feature Set selected must match the ones provided with

key codes. The Feature Set names shown below are examples only.

*** NOTE: The following questions require

on the Keycode Data Sheet.

Please have it available.***

*** NOTE: If an External Data Card is being used for

this system, please insert it into drive b: Now.***

(The following feature sets are examples)

Select Feature Set You Wish to Enable:

1. Office Communications (NTMW30CA)

2. Interoffice Communications (NTMW30DA)

3. Hospitality Communications (NTMW30EA)

4. Advanced Hospitality Communications (NTMW30FA)

[q]uit, [p]revious, [m]ain menu, [h]elp or [?],

<cr> redisplay

Enter Selection:

2<cr> (Inter-Office Communications)

January 1999

Chapters

Table of Contents

Option 11c compact