Chapter 2 - Equipment Identification; Cabinets - Nortel Meridian 1 Planning, Installation And Operating Instructions

Chapter 2 — Equipment identification

Cabinets

Option 11C Compact
This chapter identifies the major components of the Option 11C Compact
system that are pertinent to installation. Identification codes are given where
appropriate.
Main cabinet
The NTMW08 Cabinet is the main cabinet for both the Option 11C Compact
and the Compact Hospitality.
The Main cabinet houses the NTMW01 Small System Controller (SSC) card.
It can be connected to one Expansion cabinet when used with the Option 11C
Compact system, or two Expansion cabinets when used with the Compact
Hospitality system.
Expansion cabinet for Option 11C Compact
One NTMW08 Cabinet can be used as an Expansion cabinet. It provides six
additional Peripheral Equipment (PE) slots.
Note: In this case, the expansion cabinet is the same cabinet type as the
main cabinet. Only one expansion cabinet can be used with this
configuration.
Two NTMW35 Expansion cabinets can be added to the system for a total of
three cabinets. Each NTMW35 cabinet provides ten additional Peripheral
Equipment (PE) slots.
Ten-slot Cabinet
The NTMW35 is a wall mounted metal cabinet with a plastic door. The
ten-slot cabinet provides forced air cooling.
Planning, Installation, Fault Clearing and CCBR Guide
Page 7 of 536