Nortel Meridian 1 Planning, Installation And Operating Instructions page 259

Page 240 of 536
553-3121-210 Standard 3.0
Chapter 20 — Meridian Mail Compact Option installation and maintenance
Step
5 Press <Return>.
Result The Voice Port Hardware Location table (see below) is
displayed again.
If you are satisfied with the changes, select Done. The following prompt
is displayed.
Is this correct? No (Yes)
Note: At this point in the procedure, Reset and Change are still available as
choices if you wish to do anything to the settings.
If after selecting Change again, or Done you receive an
error, there may be an incorrect assignment of the voice
ports to the link. The error must be corrected before the
user may proceed.
6 Is this correct?
If No, go to step 7.
If Yes, go to step 8.
7 Select No, then press <Return>
Result You are returned to the Select Operation mode at
8 Go to "Assigning the dataport locations" on page
January 1999
Action
ATTENTION
241.
step 1.