Nortel Meridian 1 Planning, Installation And Operating Instructions page 355

Page 336 of 536
553-3121-210 Standard 3.0
Chapter 22 — Upgrading software
14 Complete restore from Flash Drive.
Note: Perform this step only when restoring a database from the flash
drive. If restoring from another source, return to
Restore successful.
If
Restore successful
message is displayed go to Step 15
If
Restore unsuccessful
message is displayed go to
15 Invoke a system restart (SYSLOAD).
Invoke a system reload (SYSLOAD) by setting the circuit breaker on
the front of the power supply in the main cabinet to OFF then to ON.
If SYSLOAD was successful
—End—
If SYSLOAD was unsuccessful go to
—————————— End of Procedure ——————————
January 1999
Step 2
Step 1
Step 3.