Chapter 23 - Pre-Programmed Data; Introduction - Nortel Meridian 1 Planning, Installation And Operating Instructions

Chapter 23 – Pre-programmed data

Introduction

Option 11C Compact
When a Meridian 1 Option 11C Compact system is initially installed,
customer data must be entered into the system software. Telephones, for
example, must be assigned features on their keys to allow them to function
properly.
However, the Software Daughterboard can be pre-programmed with the
customer data. If pre-programmed data is loaded into the system during the
Installation programs, some overlay entries will be automatically configured
on the telephones. For example, you can choose a telephone model that has
predetermined feature and key assignments and a preassigned class of
service. This can be a significant time-saver if numerous types of telephone
models must be assigned.
Pre-programmed data is not mandatory for software installation. In fact, the
Software Daughterboard can be programmed with the minimum number of
files to allow the system to operate.
See "Chapter 17 – Connecting the telephones and attendant console" on
page 157 for information about connecting and activating telephones.
Planning, Installation, Fault Clearing and CCBR Guide
Page 363 of 536