Feature Set And Ism Parameters Upgrade; Introduction; How To Upgrade Feature Set And Ism Parameters - Nortel Meridian 1 Planning, Installation And Operating Instructions

Feature Set and ISM Parameters upgrade

Introduction

How to upgrade Feature Set and ISM Parameters

Option 11C Compact
7 Complete the software installation.
*** WARNING *** A system restart will be invoked as
part of the Undo Installation process.
Are you sure you wish to undo the installation?
y<cr> (yes)
n<cr> (no)
If response was y
—End—
If response was n
go to Step 6
—————————— End of Procedure ——————————
This section describes how to upgrade the Feature set and ISM Parameters on
a Option 11C Compact when the software is not being upgraded to a new
release (same release upgrade). The Software Delivery (PCMCIA) card is not
required to perform this type of upgrade.
Summary of steps
The Upgrading and Installation steps are summarized in the following list.
They consist of:
• Invoking the Software Installation Program.
• Selecting the System Upgrade function.
• Selecting Feature Set and packages (optional).
• Selecting Incremental Software Management (ISM) parameters
(optional).
• Validating keycodes.
• Loading the software.
Upgrading Feature Set and ISM Parameters
The following procedure describes how to upgrade the Feature Set and ISM
Parameters without upgrading the software release.
Chapter 22 — Upgrading software
Planning, Installation, Fault Clearing and CCBR Guide
Page 319 of 536