Nortel Meridian 1 Planning, Installation And Operating Instructions page 423

Page 404 of 536
553-3121-210 Standard 3.0
Chapter 24 – Changing pre-programmed data
• To assign DN 2200 to card 8 unit 0, define the First DN as 2032. The
resulting DN to TN assignments are shown in
• To assign DN 2200 to card 9 unit 0, define the First DN as 2008. The
resulting DN to TN assignments are shown in
Procedure 81 describes how to change assignment of the first number in the
numbering plan to card slot.
Procedure 81
Changing DN card assignment
1 Refer to Tables 36
assignment.
Example:
To assign DN 2200 to card 5 unit 0, refer to
the First DN assignment (2104 in this example).
2 Enter the First DN in response to the prompt
"FIRST NUMBER (XXXX)?"
on the administration telephone menu.
DN 2200 is shifted to the appropriate slot (card 5 unit 0 in this example)
and the remaining DN assignments are adjusted as shown in
Tables 44 and
—————————— End of Procedure ——————————
January 1999
through Tables 53
45
.
Tables 50 and 51.
Tables 52 and 53.
and determine the First DN
Table 44 and determine