Changing A Route Access Code - Nortel Meridian 1 Planning, Installation And Operating Instructions

Page 434 of 536

Changing a route access code

553-3121-210 Standard 3.0
Chapter 24 – Changing pre-programmed data
Procedure 82 describes how to change a route access code.
Procedure 82
1 Lift the handset of the administration telephone.
2 Enter the administration Flexible Feature Code to access the
administration menu. (This value is listed in
Pre-programmed data" on page
3 Enter the default administration telephone password. (This value is
listed in "Chapter 23 – Pre-programmed data" on page
Special dial tone is heard and the prompt
"TASK?"
appears on the top line of the character display. Press the asterisk.
"2 CHANGE ROUTE ACCESS"
appears on the second line of the character display.
4 Select "2 CHANGE ROUTE ACCESS" by entering the
number "2".
The prompt
"ROUTE ACCESS?"
appears on the character display.
5 Enter the access code of the route to be modified and press the pound
key (#).
The prompt
"NEW ACCESS CODE?"
asks for a new access code for the route.
January 1999
"Chapter 23 –
363.)
363.)