Nortel Meridian 1 Planning, Installation And Operating Instructions page 254

Chapter 20 — Meridian Mail Compact Option installation and maintenance
Entering DSP parameters
To review or change the DSP parameters on your system, follow these steps
Step
Option 11C Compact
1 From the previous procedure, press <Return>.
Result The following DSP parameters screen is displayed.
You have four selections at the "Select operations" prompt which are
revealed each time you press the up or down arrow keys. Select
• "Done" if you are satisfied with the default values or after you
have completed all the parameter changes
• "Change" if any of the parameters require changing. You will
be stepped through each parameter
• "Redraw" if your screen becomes overwritten with errant
characters and you need to clear them from your DSP screen
• "Reset" if you decide to go back to the default settings after
you have changed them
2 At the "Select operation: " prompt,
if Done, go to step
If Change, go to
Planning, Installation, Fault Clearing and CCBR Guide
Action
4.
step 3.
Page 235 of 536