Removing Numbering Plan Interferences; Interference With Acd Queues; Interference With Call Park Extension Numbers - Nortel Meridian 1 Planning, Installation And Operating Instructions

Removing numbering plan interferences

Interference with ACD queues

Interference with Call Park extension numbers

Option 11C Compact
Chapter 24 – Changing pre-programmed data
The system has pre-programmed ACD queues for Meridian Mail, the Central
Answering Position, and general purpose ACD. (Pre-programmed ACD
queues are listed in
remove these values, use LD 23.
Note: Before removing this data from the system, make sure that all
ACD agent information is removed from the queue.
In LD 23, respond to the prompts as follows:
LD 23
REQ OUT
TYPE ACD
CUST 0
ACDN XXXX
Repeat for each ACD queue you wish to remove.
System call park extension numbers are pre-programmed for the Central
Answering Position. (Refer to
page 363) To remove this data from the system, load LD 50 and respond to
the prompts as follows:
LD 50
REQ OUT
TYPE CPK
CUST 0
SPDN XXXX
Repeat for each Call Park extension you wish to remove.
"Chapter 23 – Pre-programmed data" on page
"XXXX" = Value of ACD queue
"Chapter 23 – Pre-programmed data" on
"XXXX" = Value of Call Park extension
Planning, Installation, Fault Clearing and CCBR Guide
Page 423 of 536
363.) To