Nortel Meridian 1 Planning, Installation And Operating Instructions page 287
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Administration and maintenance (507 pages)
Table of Contents
Advertisement
Page 268 of 536
553-3121-210
Standard 3.0
Chapter 20 — Meridian Mail Compact Option installation and maintenance
Step
2
Select operation:
If you are installing an HVS system, go to step 3.
If you are installing a basic system, there is no need to change the
default dataport settings sjown in
3
Select Change, then press <Return>.
Result You are prompted to specify a range of nodes for which to
configure dataports.
4
For Starting Node Number, enter 1.
For Ending Node Number, enter 1.
For Node 1 Card 4 Port 1, select the default MOD0131.
For Node 1 Card 4 Port 1, select GAC.
Result You are returned to the Operation prompt.
5
Select Display to confirm your changes, then press <Return>.
Result The following detailed dataport configuration table is displayed.
The following dataports are on this system :
Node 1, Type
Node 1, Type
Node 1, Type
Node 1, Type
Node 1, Type
Node 1, Type
6
Press <Return> to continue.
Result You are returned to the dataport locations table.
7
Select Done, then press <Return>.
8
Go to
"Adding languages" on page
January 1999
Action
step
ESBC, Port 1: Dataport Name = CONSOLE
ESBC, Port 2: Datapart Name = CSL1
RSM, Port 1: Dataport Name = MOD0131
RSM, Port 2: Dataport Name = GAC
RSM, Port 3: Dataport Name = PMS0143
RSM, Port 4: Dataport Name = PMS0144
269.
1. Go to step 7.
Advertisement
Chapters
Table of Contents
