Nortel Meridian 1 Planning, Installation And Operating Instructions page 329

Page 310 of 536
553-3121-210 Standard 3.0
Chapter 22 — Upgrading software
11 Review ISM parameters.
Note: The ISM parameters displayed on the terminal screen are the
default settings associated with the Feature Set selection. These
settings can be accepted without changes or changed to suit the
requirements of the system.
Current ISM Parameters:
TNS (0048)(number of terminal numbers)
AGNT (0128)(number of ACD agents)
ACDN (0100)(number of ACD DNs)
AST (0000)(number of associate Sets)
DSL (0000)(number of Digital Subscriber Loops)
LTID (0000)(number of Logical Terminal IDs)
MOPT (0000)(Meridian Mail option)
Do you wish to change ISM parameters?
n<cr> (no change)
y<cr> (change)
If the response was n
go to Step 14
If the response was y
go to Step 12
12 Select ISM parameters.
(example)
Enter new ISM parameters, <cr> to leave as is:
TNS (0048)
AGNT (0128)
ACDN (0100)
AST (0000)
DSL (0000)
LTID (0000)
MOPT (0000)
January 1999
64<cr> (change)
<cr> (no change)
<cr> (no change)
<cr> (no change)
<cr> (no change)
<cr> (no change)
<cr> (no change)