Nortel Meridian 1 Planning, Installation And Operating Instructions page 200

Procedure 28
Connecting trunks
1 From the assignment record, determine the location of the trunk
connection and its associated Terminal Number (TN) at the
cross-connect terminal.
2 With cross-connecting wire, connect the trunk to the TN.
Make sure that the wiring is not reversed and is on the proper
terminals.
The connections for trunks are listed in
The trunk can now be activated as described in
page 186.
—————————— End of Procedure ——————————
Option 11C Compact
Chapter 18 – Connecting the trunks
Planning, Installation, Fault Clearing and CCBR Guide
Page 181 of 536
Tables 24 and 25.
"Activating trunks" on