Nortel Meridian 1 Planning, Installation And Operating Instructions page 282

Chapter 20 — Meridian Mail Compact Option installation and maintenance
Step
4
5
Defining voice port hardware locations
To define your voice channel entries for the Voice Port Hardware Location
table, follow these steps.
Step
1
Option 11C Compact
At the "Select operation:" prompt,
If Change or Reset, go to
If Done, go to step 5.
When you select Done, go to the next procedure.
Select Done on the DSP parameters.
Result The following voice port screen is displayed.
Note: The table below depends on your system configuration as defined by your
keycode and the installed system hardware. Your display may differ.
Planning, Installation, Fault Clearing and CCBR Guide
Action
step 3.
Action
Page 263 of 536