Nortel Meridian 1 Planning, Installation And Operating Instructions page 264

Chapter 20 — Meridian Mail Compact Option installation and maintenance
Continuing the software installation
To continue the software installation, reenter information, or to abort the
installation, follow these steps.
Step
1
2
3
Option 11C Compact
After selecting the starting DN , and pressing <Return>.
The following prompt is displayed.
All required information has been input.
Do you wish to continue, re-enter information,
or abort? Continue
Do you wish to continue, re-enter information, or abort?
If Continue, go to steps 3, 4, and 5.
If Re-enter, go to step
If Abort, go to step 7.
Select Continue, then press <Return>.
Result The system runs various routines.
When these routines are completed, the following message is displayed.
The operation successfully completed.
Remove the tape when it finishes rewinding and
boot into Service.
Shutting down tape server
#TAPE:MMTAPE1>
Planning, Installation, Fault Clearing and CCBR Guide
Action
6.
Page 245 of 536