Using the flash boot ROM utility
Introduction
How to use the flash boot ROM utility
Option 11C Compact
This section describes how to use the Flash Boot ROM utility to:
•
display a list showing the status and version of the Flash Boot ROMs
installed in the system and on the Software Delivery (PCMCIA) card (if
it is present)
•
upgrade the Flash Boot ROM (the Flash Boot ROM is not automatically
upgraded when the software is upgraded)
•
restore a Flash Boot ROM
Summary of steps
The steps to follow to perform the Flash Boot ROM functions are
summarized in the following list. They consist of:
•
Checking to make sure the Software Delivery (PCMCIA) card is
installed, if one is provided.
•
Invoking the Software Installation program.
•
Selecting the Utilities function.
•
Selecting Flash Boot ROM utility.
•
Selecting the desired Flash Boot ROM option.
•
Invoking the selected Flash Boot ROM function
Using the Flash Boot ROM Utility
The following procedure describes how to use the Flash Boot ROM utility.
Chapter 22 — Upgrading software
Planning, Installation, Fault Clearing and CCBR Guide
Page 353 of 536