Meridian Digital Telephones
Contents
Introduction
Functional description
Volume control
This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Meridian Digital Telephones are connected to the system through a 2-wire
loop carrying two independent 64 kb/s PCM channels with associated
signaling channels. One of the two PCM channels is dedicated to voice, while
the other is dedicated to data traffic. Line cords and handset cords on all
Meridian digital telephones are equipped with snap-in TELADAPT
connectors for quick and easy connecting procedures.
The telephone interfaces with the Digital Line Card (DLC).
This section describes the features and capabilities of Meridian Digital
Telephones.
Speaker volume (or piezo-disc transducer volume in digital telephones not
equipped with a Handsfree unit) is controlled by one key with two toggle
positions. Operating the "Volume Up" or "Volume Down" pad of the key
Telephones and Consoles
Page 17 of 532
17
17
Description