Display Fdb Agingtime - 3Com Wireless LAN Switch WX1200 Command Reference Manual

104 C 5: VLAN C
HAPTER
display fdb
agingtime
OMMANDS
Table 21 Output for display fdb (continued)
Field
CoS
Destination Ports
Protocol Type
Total Matching FDB
Entries Displayed
See Also
clear fdb on page 98
set fdb on page 113
Displays the aging timeout period for forwarding database entries.
Syntax — display fdb agingtime [vlan vlan-id]
vlan vlan-id
VLAN, the aging timeout period for each VLAN is displayed.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the aging timeout period
for all VLANs:
WX1200# display fdb agingtime
VLAN 2 aging time = 600 sec
VLAN 1 aging time = 300 sec
Because the forwarding database aging timeout period can be
configured only on an individual VLAN basis, the command lists the aging
timeout period for each VLAN separately.
Description
Type of entry. The entry types are explained in the first
row of the command output.
Note: This Class of Service (CoS) value is not associated
with MSS quality of service (QoS) features.
Wireless LAN switch port associated with the entry. A WX
switch sends traffic to the destination MAC address
through this port.
Layer 3 protocol address types that can be mapped to this
entry.
Number of entries displayed by the command.
— VLAN name or number. If you do not specify a