Set Commands; Set Attach - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

Appendix C
Commands
This appendix describes the commands in the two command sets used to
manage and configure the hub. The two command sets are:
The commands in each set are grouped into categories and arranged
alphabetically within each category.
Management Console Commands
The management console command set contains three categories of commands:

Set Commands

set attach

Syntax
set attach
Description
The set attach command allows you to set the configuration of the two leftmost
ports on the module in slot 1.
Management console commands
Primitive console commands
Set commands
Display commands
Diagnostic and connectivity commands
Commands
C-1