Fagor DDS Series Hardware Manual page 66

  Power supplies
2.
94
DDS
HARDWARE
Ref.1912
· 66 ·
The gap and tightening torque and sections of the screws of the plug-in
connectors for X3 and X4/X5/X6 are given by the table:
T. H2/21 Plug-in connector for X3. Technical data.
Connector data
Nr of poles
Gap (mm)
Min./max. tightening torque (N·m)
Screw thread
Min./max. section (mm²)
Rated current In (A)
Wire data
1x
Length to strip (mm)
T. H2/22 3 identical plug-in connectors for X4|X5|X6. Technical data.
Data of each connector
Nr of poles
Gap (mm)
Min./max. tightening torque (N·m)
Screw thread
Min./max. section (mm²)
Rated current In (A)
3x
Wire data
Length to strip (mm)
INFORMATION. In cases of micro-surges or total loss of mains power, this
i
module guarantees stable and maintained 24 V DC while the motors are
being stopped. This is an absolute must in order to comply with the EC
requirement for the machine.
XPS-25 XPS-65
3 3
7.62 7.62
0.5/0.6 0.5/0.6
M3 M3
0.2/2.5 0.2/2.5
12 12
7 7
XPS-25 XPS-65
3 3
5.08 5.08
0.5/0.6 0.5/0.6
M3 M3
0.2/2.5 0.2/2.5
12 12
7 7