Fagor DDS Series Hardware Manual page 297

Values that may be assigned to the transmission speed
The possible values, supported by the hardware, that may be selected to set
the transmission speed are:
T. H8/4 Transmission speed with SERCOS interface. Display at the drive.
Value Speed
*
QP11= 0 4 MBd
*
QP11= 1 2 MBd
QP11 = 2 2 MBd
QP11 = 4 4 MBd
QP11 = 8 8 MBd
QP11 = 16 16 MBd
* to be compatible with previous versions of the SERCOS board.
See the values that will be assigned to their associated parameter QP11 in
chapter 13 of the "man_dds_soft.pdf" manual.
Shown on the display
   Installation
8.
DDS
HARDWARE
Ref.1912
· 297 ·