Fagor DDS Series Hardware Manual page 199

FAGOR supplies the aerial connector in the accessory bag. The values for
pitch, tightening torque, pole section (input holes of the connector) and other
data regarding the terminals of this connectors are shown in the following
table.
T. H4/16 Aerial connector that may be plugged into X56. Technical data.
Connector data
Nr of poles
Gap (mm)
Min./max. tightening torque (N·m)
Screw thread
Min./max. section (mm²)
Rated current In (A)
x1
Wire data
Length to strip (mm)
Chapter 8. INSTALLATION describes the procedure for a correct installation
of the braking resistors to the BPM through this connector and of the unit in
the system.
D57, status light indicators
 FAULT. There is an error. Top LED red.
 BALLAST. Crowbar activated. Middle LED amber.
 READY. Unit ready. Bottom LED green.
  Auxiliary modules
6
7.62
0.5/0.6
M3
0.2/4
20
7
4.
DDS
HARDWARE
Ref.1912
· 199 ·