Fagor DDS Series Hardware Manual page 252

   Cables
7.
DDS
HARDWARE
Ref.1912
· 252 ·
CAN cable
Cable supplied by FAGOR upon request. It is used to establish
communication through a CAN field bus between drives and a master
device (CNC, PC, ESA panel, etc.). It consists of a pair of twisted wires with
a section of 0.25 mm², overall shield and impedance of 120 . It is supplied
without connectors. It comes in lengths from 5 m to 150 m, in multiples of 5.
Its sales models are:
CAN CABLE M
T. H7/23 Range of CAN CABLE  M cables.
The number indicates length in meters.
CAN CABLE 5M CAN CABLE 30M
CAN CABLE 10M CAN CABLE 35M
CAN CABLE 15M CAN CABLE 40M
CAN CABLE 20M CAN CABLE 45M
CAN CABLE 25M CAN CABLE 50M
Fagor Cable
CAN CABLE 5/10/15/20/25 5M/10M/15M/20M/.../150M
Length in meters
Cable 1x2x0.25
Pin
Signal
1
CAN L
2
SHIELD 3
4
CAN H
5
Note. The ends of the wires and the shield already have their pin. This
cable does not include connectors.
F. H7/7
CAN cable.
Its mechanical characteristics are:
T. H7/24 CAN CABLE  M cable. Mechanical characteristics.
Type Shield. It ensures EMC compatibility
Ø
Ext. diameter ext. = 6.3 mm
High. Special to be used in cable carrying chains with a
bending radius of 15 times the
Flexibility
conditions and 8 times the
PUR. Polyurethane resistant to chemical agents used in
Covering
machine-tools.
Work: -30°C/70°C (-22°F/158°F)
Temperature
Storage: -5°C/70°C (23°F/158°F)
Rated voltages Uo / U: 250/1 000 V
CAN CABLE 75M
CAN CABLE 100M
CAN CABLE 150M
Brown
White
Ø
ext under dynamic
Ø
ext under static conditions.
Pin
1
CAN L
2
3 SHIELD
4
CAN H
5