Fagor DDS Series Hardware Manual page 58

  Power supplies
The regenerative power supply XPS-65 has the following connectors:
2.
X2
94
F. H2/18
Regenerative power supply, XPS-65. Connectors.
1.
2.
DDS
3.
HARDWARE
4.
5.
X1. Connector for inter-module communication.
X2. Connector for the basic control signals.
Ref.1912
X3. Input connector supplying from mains to the auxiliary power supply integrated into the module.
X4. Output connector of the auxiliary 24 V DC power supply integrated into the module.
X5. Output connector of the auxiliary 24 V DC power supply integrated into the module.
X6. Output connector of the auxiliary 24 V DC power supply integrated into the module.
· 58 ·
X1
X3
X4
X5
X6
4
Power connector for the three-phase mains.
Power connector for the external Ballast resistor connection.
Ground connection for the mains cable.
Power DC BUS supplying power to the moudular drives through metal bars.
Connectors for the choke of the XPS-65.
The mains power is received through it. It admits a voltage between 400 and 460 V AC.
3
L1
CAUTION. AC touch current greater
3.5 mA. Install ground wire of at least
10 mm² (Cu) or 16 mm² (Al).
CH1
Ri Re L+
2
4
1
L2 L3
CH2
5
4