Mvr Configuration - ZyXEL Communications MES-2110 User Manual

Click Save Settings in the navigation panel to store the changes permanently.
6

4.3 MVR Configuration

MVR manages multicast traffic from an upstream VLAN on a multicast server to
downstream subscribers in the same VLAN group. This allows you to regulate
bandwidth by not streaming multicast traffic to every device on your network but
rather just to the intended computers.
This tutorial shows you set up a Multicast VLAN Registration (MVR) group and then
direct all multicast traffic with matching VLAN IDs to it.
For the purposes of this tutorial, use the following settings:
Table 3 MVR Tutorial Values
SETTING
VLAN Name
VLAN ID
Source Port
Receiver Ports
Multicast Group Mode
Tagging Ports
Multicast Group IP Addresses
Multicast Group ID
Note: Make sure your Configuration > VLAN Menu > VLAN Type is set to Tag-
Based(802.1q) before proceeding.
MES-2110 User's Guide
VALUE
StreamVlan
100
9
1-4, 10
Dynamic
9, 10
223.3.3.1 ~ 223.3.3.10
1
Chapter 4 Tutorials
41