Radius Server Configuration Screen - ZyXEL Communications MES-2110 User Manual

10.5 802.1x Radius Server Configuration Screen
Use this screen to view a summary of port authentication settings on the MES-
2110 and in each individual ports.
Click Configuration > 802.1x > 802.1x Status in the navigation panel to
display the screen as shown.
Figure 35 Configuration > 802.1x Status
The following table describes the labels in this screen.
Table 18 Configuration > 802.1x Status
LABEL
802.1x
Guest VLAN
Reauth-Max
Server IP
Address
Server
Shared Key
Server UDP
Port Number
Server
Accounting
Port Number
Server Time-
Out
The table below describes the settings for ports 1-10
Active
MES-2110 User's Guide
DESCRIPTION
This shows if port authentication is enabled on the MES-2110.
This shows if a Guest VLAN is enabled on the Switch.
This shows the number of times the MES-2110 attempts to authenticate
clients for port access.
This is the IP address of the RADIUS server.
This is the password shared between the external authentication server
and the MES-2110.
This is the port number of the RADIUS server.
This is the port number of the external accounting server.
This shows how many minutes a session can be idle before the session
times out.
When a session times out, the client has to send a new request to the
server and be authenticated again.
This shows if port authentication is enabled on the port.
Chapter 10 802.1x
83