ZyXEL Communications MES-2110 User Manual page 209

I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
Check the hardware connections, and make sure the LEDs are behaving as
2
expected. See
Make sure your Internet browser does not block pop-up windows and has
3
JavaScripts and Java enabled.
Make sure your computer is in the same subnet as the MES-2110. (If you know
4
that there are routers between your computer and the MES-2110, skip this step.)
Reset the device to its factory defaults, and try to access the MES-2110 with the
5
default IP address. See
If the problem continues, contact the vendor, or try one of the advanced
6
suggestions.
Advanced Suggestions
Try to access the MES-2110 using another service, such as Telnet or over the
console port. If you can access the MES-2110, check the remote management
settings to find out why the MES-2110 does not respond to HTTP.
Some possible reasons for being unable to connect over the in-band management
ports are that you:
Deleted the management VLAN (default is VLAN 1).
1
Deleted all port-based VLANs with the CPU port as a member. The "CPU port" is
2
the management port of the MES-2110.
Filtered all traffic to the CPU port.
3
Disabled all ports.
4
Misconfigured the text configuration file.
5
Prevented all services from accessing the MES-2110.
6
MES-2110 User's Guide
I forgot the IP address for the MES-2110.
Section 3.4 on page 35.
Section 5.6 on page
Chapter 24 Troubleshooting
59.
209