ZyXEL Communications MES-2110 User Manual page 184

Chapter 23 Command Line Interface
Table 78 Privileged Commands
COMMAND
show dhcp static-binding
show dhcp dynamic-binding
show dot1x global
show dot1x radius-server
show dot1x port-control
show email-alarm
show frame
show hdos
show igmp
show interface
show LACP
show locked-mac
show logins
show loop
show mac
show mac-aging-time
show mac-filter-table
show mac-limit
show mirror
show mvr
show priority-override
show qinq-sp-tpid
show qos priority-mode
show qos default-priority-queue
show qos tag-priority-queue
show qos ip-tos-pri-queue
show qos schedule
show rmon port [+n | all]
184
DESCRIPTION
Displays the DHCP static binding table.
Displays the DHCP dynamic binding table.
Displays 802.1x global information.
Displays the 802.1x RADIUS server
configuration.
Displays the 802.1x port-control information.
Displays the email configuration.
Displays the maximum frame size configuration.
Displays the Denial-of-Service configuration.
Displays the igmp configuration.
Display detailed port information for all ports.
Displays LACP information.
Displays the locked MAC address learning status.
Displays a list of recent logins.
Displays the loop detection configuration.
Displays the MAC table.
Displays the MAC aging time.
Displays the MAC filter table.
Displays the MAC limit table.
Displays the mirror configuration.
Displays multicast status, including the port
number, VLAN ID and multicast group members
on the switch. Optionally, displays the type of
each multicast VLAN.
Displays the priority override status table.
Displays the Server Provider Tag Prototol
Identifier.
Displays QoS priority-mode and IP-over-tag
settings.
Displays the QoS port priority.
Displays the QoS tag priority.
Displays the QoS IP-TOS priority to queue
mapping.
Displays the QoS schedule type.
Displays the device's RMON information.
: Enter plus sign followed by port number to
+n
display just that port's information. For example,
. You can also chain
show rmon port +1
multiple port numbers together, such as
(which displays information
rmon port +1+2+6
for just ports 1, 2, and 6).
: Displays RMON information for all ports.
all
show
MES-2110 User's Guide